View All AR AK Parts Acc
Hope to see you soon,
Fred Emerson III
Owner
Full featured spring loaded flip up sight
Ambidextrous push-button deploymentand rapid-select rear aperture system
0.44" high when foldedand 1.15" wide at widest point
Standard AR-height when deployed
Impact resistant polymer construction
Clamps to most MIL-STD-1913 picatinny rails
Made in the U.S.A.
Product Description
The next evolution in Magpul's MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of their original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.44" high when folded and 1.15" at its widest point. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 Rear Sight sits at standard AR-height when deployed and includes a rapid-select aperture system.
Specifications
UPC 840815132196
Manufacturer Magpul Industries
Manufacturer Part # MAG1167-BLK
Model 3
Model MBUS
Type Sight
Fit Picatinny
Color Black
Description Rear
Subcategory Long Gun Sights
Tweet |
Made in U.S.A.
FEATURES
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
- Protective wings shield the spring-locking A2 front sight post
- Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well
Specs
Due to MAP pricing please contact us for the BEST PRICE.
Tweet |
Made in U.S.A.
FEATURES
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
- Protective wings shield the dual, same plane flip apertures
- Sight can still be folded with either large or small aperture in position
- Detent knob easily and positively adjusts windage
Specs
Tweet |
The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Commercial-Spec
- Weight: 8.5 oz.
- Weight, w/receiver extension: 13.8 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Mil-Spec
- Weight: 8.0 oz.
- Weight, w/receiver extension: 12.0 oz.
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Replacement for AR15/M4 pistol-grip
One-piece reinforced polymer construction
More vertical grip angle than A2 grips
Aggressive TSP texture
Product Description
Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.
Specifications
UPC 873750008103
Manufacturer Magpul Industries
Manufacturer Part # MAG522-BLK
Model MOE-K2
Type Grip
Color Black
Description TSP Texture
Fit AR Rifles
Subcategory Grips
Tweet |
Replacement for AR15/M4 pistol-grip
One-piece reinforced polymer construction
More vertical grip angle than A2 grips
Aggressive TSP texture
Product Description
Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.
Specifications
UPC 873750008110
Manufacturer Magpul Industries
Manufacturer Part # MAG522-FDE
Model MOE-K2
Type Grip
Color Flat Dark Earth
Description TSP Texture
Fit AR Rifles
Subcategory Grips
Tweet |
Directly mounts to M-LOK compatible systems
Uses MAGPUL TSP texture
Low profile and light weight
Weight, w/hardware: 1.4 oz. Length: 3.0"
Product Description
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the thumb break method of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.
Specifications
UPC 873750004662
Manufacturer Magpul Industries
Manufacturer Part # MAG597-FDE
Model MVG M-LOK
Type Vertical Foregrip
Color Flat Dark Earth
Fit M-LOK Hand Guard
Subcategory Grips
Tweet |
Combine with the MS1 Sling and Paraclip
Combine with the MS1 Sling and Paraclip to provide two to one-point convertibility. Constructed of Melonite™ finished steel and reinforced polymer hardware that's combined with custom, snag-free, high durability 1-1/4" webbing.
Made in the USA.
Tweet |
In testing, the sling had to survive tens of thousands of cycles in wet, dry and sandy conditions, static load testing without slippage for 72 hours and weighted six foot dynamic drop tests. In addition to the controlled lab tests, we also swam it, jumped it, hunted with it, hiked into the mountains with it, and most importantly shot with it in a variety of rugged field conditions.
The MS1 Sling is fully Berry Amendment compliant.
Made in the USA.
Tweet |
Custom QDM on our innovative sling
The Magpul MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but is also optimized for dedicated two-point sling functionality built around the streamlined MS1 Slider.
Once set, this system allows for rapid adjustments to either lengthen or shorten the sling without slippage, tails, loops or other potential snag hazards. In a two-point role, the MS1 allows seamless shoulder transitions, fast adjustability for hands-free rifle carry and shooting support from various positions. The Magpul MS1 QDM Sling retains all of the original MS1 functionality and is fully adaptable for one-point applications with a series of adapters (sold separately) based on the MS3® and MS4® Slings.
In testing, the MS1 Sling survived tens of thousands of cycles in wet, dry and sandy conditions, static-load testing without slippage for 72 hours, and weighted six-foot dynamic drop tests. In addition to the controlled lab tests, we also swam with it, jumped with it, hunted with it, hiked into the mountains with it, and—most importantly—shot with it in a variety of rugged field conditions.
The Magpul MS1 QDM Sling is made in the USA and is fully Berry Amendment compliant.
Tweet |
Fast transition between one-point and two-point configuration
Light weight yet durable hardware
Low-profile adjustment Slider
Steel Para clip levers
Product Description
Driven by the operational experience of Magpul instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. Used in conjunction with the optional Magpul ASAP(R) plate, the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. The MS3 can also increase operator survivability by keeping the weapon in the fight in case of injury to the operator's shoulder, arm, or hand. The MS3 GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A. and 100% Berry Amendment compliant.
Specifications
UPC 873750010670
Manufacturer Magpul Industries
Manufacturer Part # MAG514-BLK
Model MS3
Type Sling
Color Black
Tweet |
Features two heavy-duty QD Sling Swivel
Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™, it features two heavy-duty push-button QD Sling Swivels, along with a custom steel connection ring to allow one-to-two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.
The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Tweet |
Our traditional vertical grip for MOE
Designed for use with MOE Hand Guards and Forends, the MVG is a basic, light weight, cost-effective vertical fore grip that attaches directly to MOE hand guards without need for rails. The shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
All mounting hardware included. All mounting hardware included.
NOTE: MOE accessories are not compatible with M-LOK slots.
Made in the USA.
Tweet |
Clip-style sling attachment point
Clip-style sling attachment point for 1-1/4" webbing that provides weapon quick-release capabilities in an emergency. Cross-Bolt Lock Bar allows the user to optionally lock the lever closed for extra security. Compatible with ASAP Plate, RSA, MSA, SGA Receiver Sling Mount, and many other clip-in sling attachment points*. Combine with the MS1 Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD Adapter for a two to one-point convertible sling.
Light weight yet durable construction with hardened Melonite finished steel and heavy-duty polymer.
Made in the USA.
Tweet |
Added control to GEN M3 PMAGs
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger Plate. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Made in the USA.
Tweet |
Fits older pre-GEN M2 variants of AR15/M16 PMAG (with Black or Foliage Followers) and PMAG GEN M3 but will not adequately seal that magazine
Product Description
Supplemental Impact/Dust Covers for the 5.56x45 PMAG 30 AR/M4 GEN M2 MOE, PMAG 20, and EMAG(TM), designed to minimize debris intrusion and protect against potential cartridge damage during storage and transit. NOTE: These will also fit all older pre-GEN M2 variants of AR15/M16 PMAG (with Black or Foliage Followers). This cover will likewise fit the PMAG GEN M3 but, being it is of a slightly different design, will not adequately seal that magazine against debris intrusion.
Specifications
UPC 873750002309
Manufacturer Magpul Industries
Manufacturer Part # MAG216-BLK
Fit PMAG
Units per Box 3Pk
Caliber 223 Remington
Model PMAG Dust/Impact Cover
Type Magazine Accessory
Color Black
Subcategory Magazine Parts
Tweet |
Allows use with clip-in attachments
The QD Paraclip Adapter fits push-button QD swivel sockets to allow use with Paraclips and other clip-in sling attachments. Made from precision-cast Melonite™ finished steel.
Made in the USA.
Tweet |