View All AR AK Parts Acc
Hope to see you soon,
Fred Emerson III
Owner
Supports multiple accessories
M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
Reinforced, heat-resistant polymer construction
ntegral riveted aluminum heat shield
Replaces standard M4 Carbine-type plastic hand guards
Front lip and side extensions, shields hand from hot gas block
Functional design
Product Description
The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly. Made in U.S.A.
Specifications
UPC 873750002385
Manufacturer Magpul Industries
Manufacturer Part # MAG424-FDE
Model MOE M-LOK
Type Handguard
Color Flat Dark Earth
Fit AR Rifles
Size Carbine
Subcategory Handguards & Forends
Tweet |
Directly mounts to M-LOK compatible systems
Uses MAGPUL TSP texture
Low profile and light weight
Weight, w/hardware: 1.4 oz. Length: 3.0"
Product Description
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.
Specifications
UPC 873750004655
Manufacturer Magpul Industries
Manufacturer Part # MAG597-BLK
Model MVG M-LOK
Type Vertical Foregrip
Color Black
Fit M-LOK Hand Guard
Tweet |
For range of motion greater than 180 degrees
The ASAP Ambidextrous Sling Attachment Point allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation for both left and right handed shooters. The ASAP replaces the standard AR15/M4 carbine stock receiver end plate, providing a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP works with one-point type slings with snap hook style attachments such as the Magpul MS3.
Made from precision cast black manganese phosphatized steel, The ASAP is a durable welded-link ring that is compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions (buffer tubes). The ASAP has been proven to withstand stress tests of over 300lbs.
Made in the USA.
Tweet |
Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions.
Made in the USA.
Tweet |
The Magpul Bipod for M-LOK
The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Made in the U.S.A.
Tweet |
Durable & Lightweight
Innovative, Adjustable, & Easy to Use
Smooth & Unobtrusive
Functional Feet
1913 Picatinny Rail (MAG941)
Product Description
The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. 1913 Picatinny Rail (MAG941)
Specifications
UPC 840815119333
Manufacturer Magpul Industries
Manufacturer Part # MAG941-BLK
Model Bipod
Type Bipod
Color Black
Description Aluminum
Fit 1913 Rail
Subcategory Bipods
Tweet |
Designed for streamlined storage until deployment
Leg extensions slide and lock securely with the push of a button
Spring-tensioned legs stow forward when not in use
Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment
Product Description
The Magpul Bipod - Sling Stud QD offers serious strength and versatility at a price that provides unmatched value. Lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven locking detents. An industry-exclusive 50 degrees of total tilt is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.5" deep and 3.3" wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. This bipod attaches to a standard sling swivel stud.
Specifications
UPC 840815123071
Manufacturer Magpul Industries
Manufacturer Part # MAG1075-BLK
Model Bipod
Type Bipod
Color Black
Accessories w/ Quick Detach Mount
Fit Sling Stud
Subcategory Bipods
Tweet |
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Commercial-Spec
- Weight: 9.3 oz.
- Weight, w/receiver extension: 13.6 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Mil-Spec
- Weight: 8.8 oz.
- Weight, w/receiver extension: 12.8
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Dual Tension locking system improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability
Ambidextrous controls
Newly designed non-slip butt pad
Rotation-limiting QD sling mount
1.25" footman's loop sling mount
Compatible with CTR Cheek Risers
Product Description
The DT Carbine stock is a drop-in replacement for firearms equipped with a Mil-Spec receiver extension tube. Featuring dual tensioning technology, combining the best features of the SL and CTR stocks, the DT Carbine stock provides greater strength and stability that's super easy to adjust. The A-frame style carbine stock features an auto engaging friction lock providing extra tight lockup on the buffer tube without the need for a manual secondary friction lock. The result is increased durability in case of severe impacts and quick, smooth, and frictionless length-of-pull adjustments on the fly.
Specifications
UPC 840815147541
Manufacturer Magpul Industries
Manufacturer Part # MAG1377-BLK
Model DT Carbine Stock
Type Stock
Color Black
Description Mil-Spec
Fit AR-15
Subcategory Stocks & Buffer Tubes
Tweet |
Very low-profile 1913 picatinny rail coverage
Semi-rubbery material
Easily cut for custom lengths
Improves weapon control and rail protection
Product Description
Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc.
Specifications
UPC 873750001364
Manufacturer Magpul Industries
Manufacturer Part # MAG013-BLK
Model Ladder Rail Panel
Type Accessory
Color Black
Description Rail Covers
Fit Picatinny
Tweet |
Directly mounts to M-LOK compatible T-nuts
Recoil/Impact mitigation lugs
Milspec-anodized aluminum
Product Description
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 5 Slots, max overall length of 2.5". Made in U.S.A.
Specifications
UPC 873750001661
Manufacturer Magpul Industries
Manufacturer Part # MAG581
Model M-LOK Aluminum Rail
Type Accessory
Color Black
Description 5 Slots
Fit M-LOK Hand Guard
Tweet |
Directly mounts to M-LOK compatible T-nuts
Recoil/Impact mitigation lugs
Milspec-anodized aluminum
Product Description
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots, max overall length of 3.3". Made in U.S.A.
Specifications
UPC 873750001678
Manufacturer Magpul Industries
Manufacturer Part # MAG582
Model M-LOK Aluminum Rail
Type Accessory
Color Black
Description 7 Slots
Fit M-LOK Hand Guard
Tweet |
Directly mounts to M-LOK compatible T-nuts
Recoil/Impact mitigation lugs
Milspec-anodized aluminum
Product Description
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots, max overall length of 4.1". Made in U.S.A.
Specifications
UPC 873750001685
Manufacturer Magpul Industries
Manufacturer Part # MAG583
Model M-LOK Aluminum Rail
Type Accessory
Color Black
Description 9 Slots
Fit M-LOK Hand Guard
Tweet |
Low profile M-LOK bipod mounting solution
Mil-spec anodized aluminum
Beveled ends and corners
Product Description
The Magpul M-LOK Bipod Mount allows for the attachment of Harris(R)-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from milspec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33 in. Made in U.S.A.
Specifications
UPC 873750004488
Manufacturer Magpul Industries
Manufacturer Part # MAG609
Model M-LOK Bipod Mount
Type Accessory
Color Black
Fit M-LOK Hand Guard
Subcategory Bipods
Tweet |
Forward attachment point for the MS4
The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.
All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required.
Made in the USA.
Tweet |
The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction.
Features
Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
Impact resistant polymer construction provides light weight and resists operational abuse
Wide-set, two-piece bolt-on design resists flexing
Integral grooves interface with PMAG ribbing to eliminate slippage
Made in U.S.A.
E.A.R.
Export Administration Regulations Controlled Product
Specs
Specifications
MagLink Magazine Coupler AR/M4
Weight: 2.8 oz.
*NOTE: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 and 7.62x51 PMAGS or any metal magazine.
Tweet |
Full featured spring loaded flip up sight
Tool-less elevation adjustment and dual width enhanced front sight post
0.44" high when folded and 1.15" wide at widest point
Standard AR-height when deployed
Impact resistant polymer construction
Calmps to most MIL-STD-1913 picatinny rails
Made in the U.S.A.
Product Description
The next evolution in Magpul's MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of their original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.44" high when folded and 1.15" at its widest point. Its aesthetics are derived from the MBUS Pro, but the MBUS 3 Front Sight is constructed of their impact-resistant polymer, making it lightweight and extremely durable. Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button. The MBUS 3 sits at standard AR-height when deployed. The MBUS 3 Front Sight includes tool-less elevation adjustments and a dual width enhanced front sight similar to the MBUS Pro.
Specifications
UPC 840815132165
Manufacturer Magpul Industries
Manufacturer Part # MAG1166-BLK
Model 3
Model MBUS
Type Sight
Fit Picatinny
Color Black
Description Front
Subcategory Long Gun Sights
Tweet |