Magpul AR Furniture
Hope to see you soon,
Fred Emerson III
Owner
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Mil-Spec
- Weight: 8.8 oz.
- Weight, w/receiver extension: 12.8
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet | ![]() |
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Commercial-Spec
- Weight: 9.3 oz.
- Weight, w/receiver extension: 13.6 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet | ![]() |
The Commercial-Spec Model includes an extended 0.55" thick rubber butt-pad to provide positive shoulder purchase and accommodates the longer, slanted back common to most commercial-spec tubes.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Replaceable 0.55" Extended Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Commercial-Spec
- Weight: 8.5 oz.
- Weight, w/receiver extension: 13.8 oz.
- Length, max: 7.2 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.8 in.
- LOP, M4 Extended: ~14.6 in.
* Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet | ![]() |
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order the Commercial-Spec MOE
SPECIFICATIONS*
MOE Carbine Stock, Mil-Spec
- Weight: 8.0 oz.
- Weight, w/receiver extension: 12.0 oz.
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet | ![]() |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR
Tweet | ![]() |
A shielded operation lever and supplemental friction locking system prevent accidental operation and minimize excessive stock movement for enhanced weapon stability and accuracy.* The STR incorporates two integral sling loops, a reversible push-button QD sling mount, and a replaceable 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and others (please see the note below)
- Two water-resistant battery storage tubes located on the left and right sides of the stock
- Each tube will store up to two (2) CR123A lithium or AA batteries
- Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
- Supplemental friction lock minimizes accuracy robbing wobble*
- Premium chrome-silicon lock spring provides positive locking and long service life
- Sloping cheek weld provides a wide contact surface for user comfort
- Shielded release latch prevents snagging and accidental operation
- Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- Sling Mounts
- Rear – Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
- Rear/Bottom – 1.25" sling loops
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec extension on your rifle, make sure to order the Mil-Spec STR
SPECIFICATIONS**
STR Carbine Stock, Commercial-Spec
- Weight: 12.3 oz.
- Weight, w/receiver extension: 16.3 oz.
- Length, max: 7.3 in.
- Width, max: 2.6 in.
- LOP Adjustment Range: 3.8 in.
- LOP, M4 Collapsed: ~10.9 in.
- LOP, M4 Extended: ~14.7 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension and may vary depending on tube manufacturer.
Tweet | ![]() |
It is designed for enhanced shoulder purchase and offers improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE / CTR stocks, but may prohibit use of the fully collapsed position due to the extended, slanted back of most Commercial-Spec receiver extensions.
All mounting hardware included.
Made in the USA.
NOTE: Not compatible with MOE Fixed Carbine Stock.
Tweet | ![]() |
May also be installed on Commercial-Spec MOE / CTR stocks, but may prohibit use of fully collapsed position.
All mounting hardware included.
Made in the USA.
NOTE: Not compatible with MOE Fixed Carbine Stock.
Tweet | ![]() |
Replaces standard M4 Carbine-type hand guards
M-LOK slots at the two, six, and ten o'clock positions
Reinforced, heat-resistant polymer
Product Description
The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly. Made in U.S.A.
Specifications
UPC 873750002378
Manufacturer Magpul Industries
Manufacturer Part # MAG424-BLK
Model MOE M-LOK
Type Handguard
Color Black
Fit AR Rifles
Size Carbine
Tweet | ![]() |
Mounts on Mil-Spec sized carbine receiver extension tube
Premium chrome-silicon lock spring provides positive locking and long service life
Sloping cheek weld combines a slim profile with user comfort
Shielded release latch prevents snagging and accidental operation
Product Description
The MOE Stock - Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Specifications
UPC 873750003115
Manufacturer Magpul Industries
Manufacturer Part # MAG400-FDE
Model MOE Carbine Stock
Type Stock
Color Flat Dark Earth
Description Mil-Spec
Fit AR-15
Subcategory Stocks & Buffer Tubes
Tweet | ![]() |
Supports multiple accessories
M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
Reinforced, heat-resistant polymer construction
ntegral riveted aluminum heat shield
Replaces standard M4 Carbine-type plastic hand guards
Front lip and side extensions, shields hand from hot gas block
Functional design
Product Description
The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly. Made in U.S.A.
Specifications
UPC 873750002385
Manufacturer Magpul Industries
Manufacturer Part # MAG424-FDE
Model MOE M-LOK
Type Handguard
Color Flat Dark Earth
Fit AR Rifles
Size Carbine
Subcategory Handguards & Forends
Tweet | ![]() |