GUN PARTS AND ACCESSORIES

Sticky Holsters MD-3 - Suitable for Walther PPK and sim. - from 3.5-4” barrel. Ambidextrous fit for right and left handed users.
 

Sticky Holsters allow you to deploy and adjust your firearm in seconds. No bulky clips or straps to get in the way. Our lightweight holsters weigh less than 3 oz. and the closed-end design keeps lint and dust out, while keeping gun oil off of you. Body heat and use conforms holster to your gun, so your holster fit will continue to improve with use.
 

THE MD-3 STICKY HOLSTER FITS THE FOLLOWING GUN MODELS

Model Name	Caliber	Barrel
Beretta Cheetah	380ACP	3.82
Browning 1911-380 Black Label Compact	380ACP	3.62
Browning BDA	380ACP	3.8
Colt Goverment MK-IV Model 80	380ACP	3.25
CZ-USA 82	9mm/380ACP	3.8
Remington R51	9mm	3.4
Sig Sauer P232	380ACP	3.6
Walther PPKS	ALL	3.35
Walther PPK	ALL	3.3
Interarms EPK	380ACP	3.35
Star, S.A. Firestar Plus	9MM
Sterling Arms Mark II	380ACP	3.5
Bersa Thunder 380	380ACP	3.5
Bersa Thunder 380 CC	380ACP	3.2
Bersa Thunder 380 Plus	380ACP	3.5
Bersa Firestorm .380	380ACP	3.5
Bersa Firestorm .22 LR	22LR	3.5
Browning BDA 380	380ACP	3.8
Norinco Model 59 (Macarov)	9x18mm
Simson Suhl V series Macarov 9x18	9x18mm
Miltex Makarov Special Edition	9x18mm
CZ-USA 82	ALL
Colt Government MK-lV Model 80	380ACP	3.25
Sig Sauer P230	ALL	3.6
Kahr P9	9mm	3.6
Kahr CW 9	9mm	3.5

Tweet

These grips are made of soft rubber with a cobblestone (stippled) surface for good grip control. Conversion grips convert a round butt frame to a square butt feel or vice versa.


Compatible With:

S&W 30 J-Frame, S&W 31 J-Frame, S&W 32 J-Frame, S&W 33 J-Frame, S&W 34 J-Frame, S&W 35 J-Frame, S&W 36 J-Frame, S&W 37 J-Frame, S&W 38 J-Frame, S&W 40 J-Frame, S&W 42 J-Frame, S&W 43 J-Frame, S&W 49 J-Frame, S&W 50 J-Frame, S&W 51 J-Frame, S&W 60 J-Frame, S&W 63 J-Frame, S&W 317 J-Frame, S&W 331 J-Frame, S&W 332 J-Frame, S&W 337 J-Frame, S&W 340 J-Frame, S&W 342 J-Frame, S&W 360 J-Frame, S&W 422 J-Frame, S&W 431 J-Frame, S&W 432 J-Frame, S&W 442 J-Frame, S&W 631 J-Frame, S&W 632 J-Frame, S&W 637 J-Frame, S&W 638 J-Frame, S&W 640 J-Frame, S&W 642 J-Frame, S&W 649 J-Frame, S&W 650 J-Frame, S&W 651 J-Frame, S&W 940 J-Frame, S&W Bodyguard 38 J-Frame

Tweet

UTG Ultra Slim Angled Foregrip M-LOK Matte Black

UPC: 4717385555013
BRAND: Leapers
MFG PRODUCT #: MT-AFGM01

Tweet

Featuring an open top and open muzzle design, this leather belt holster features deep molding for a perfect fit. Two piece contruction with front molding and backside contour to the body, creating a comfortable carry while leather lining protects your gun's finish. This open OWB holster is a great fast draw option. Belt slots accommodate belts up to 1 3/4" wide.

Fits: Most Glock Full size 9mm and 40 s&w double stack Pistols simular to Glock 17 and 22 - Right Hand

Tweet

Bulldog FSN-14 Black Revolver Holster - Fits Revolvers w/ 5 – 6 1/2″ Barrels ( S&W – K, L, N Frame Etc )
 

Bulldog® Extreme – Pistol Holster Belt Loop & Clip (AMBI)

Durable Nylon Water-Resistant Outer Shell & Top Grade Fused Padding Provide The Ultimate In Fit, Comfort & Protection For You & Your Pistol
–  Ambidextrous Belt Loop & Metal Clip
–  Soft, Scratch Resistant Inner Lining
–  Spine Protector Keeps Gun Sights From Tearing The Inner Lining

Tweet

HKS Speedloader 36-A 5 Shot 38spl / 357mag - The HKS Revolver Speedloader instantly drops cartridges with just the slightest twist, loading the entire cylinder of your revolver. Strong metal points hold cartridges securely in the lightweight polymer body until released. The knurled aluminum knob allows for a sure grip under the most stressful circumstances and the also makes the speedloaders easier to grab out of a pouch. All HKS products are proudly made in the USA.

Technical Information: HKS Revolver Speedloader

Fits:

• S&W 36, 47, 38, 40, 42, 49, 60, 340, 360
• Charter Arms/ Taurus 85, 605, 651, 851
• Rossi 68
• Ruger SP101

Materials: Injection Molded Delrin Plastic with aluminum Knob

Notes:

• Oversized Grips: Some revolvers have grips that interfere with speedloaders. These grips must be altered or replaced so the speedloader does not touch the grip when cartridges are released

Tweet

Bianchi 100 Sz 21 Ruger LC9 LC9S Glock 42 Holster - The Model 100 Professional holster is a comfortable inside-the-waistband design offering deep concealment. It rides at an optimum angle inside the waistband to ensure a secure fit and a proper firing grip on the draw. The high back provides a shield between the body and potentially sharp edges of the pistol for comfort and to protect clothing. A heavy-duty spring-steel belt clip safely and securely anchors the holster to the waistband or belts up to 1.75” wide. Made from premium full grain cowhide, the Professional holster features a non-slip suede-lined exterior that sits next to the body.

Fits:
Ruger
        LC9, 3.12 Inch
        LC9S, 3.12 Inch
        LC9s Pro, 3.12 Inch

Glock
         42

Due to MAP pricing please contact us for the BEST PRICE.

Tweet

Fobus, Evolution, E2 Paddle Holster, Fits Sig Sauer P365, Right Hand, Kydex, Black Finish

    Maintenance free
    Lifetime Warranty
    Kydex construction

Product Description

Fobus Holster was founded in 1978 and is Israel's leading holster maker. Fobus was the first holster company to introduce injection molded polymer holsters and was developed for the Israeli Military and Special Security services. Fobus holsters and mag pouches are made of high density polymers which are exceptionally comfortable, lightweight and extremely durable. Fobus offers a variety of over 160 different passive and active retention holsters, in both left & right handed versions, fitting hundreds of different firearms and revolvers, with all possible carry options.

Specifications
UPC    676315035589     
Manufacturer    Fobus
Manufacturer Part #    365ND     
Model    E2
Type    Paddle Holster     
Hand    Right Hand
Color    Black     
Fit    Sig P365
Subcategory    Holsters     
Material    Kydex

Tweet

Blackhawk Single Stack Mag Case Black - Our Single Mag Cases feature a built-in tension spring to securely hold magazines of various sizes. For two magazines on the same carrier, you can remove the belt clip and place two Single Mag Cases side-by-side on our Dual Rail Accessory Platform (sold separately). The case can also be placed next to one of our light carriers for a combo light/mag carrier.

• Features a built-in tension spring to securely hold magazines of
various sizes
• Remove the belt clip and place two Single Mag Cases side-by-side on Dual Rail Accessory Platform
• Fits 9mm/.40 cal/.45 cal/10mm/.357 Sig

Tweet

Pearce Grip Extension PG-XD45 Springfield XD 45 - These units replace the magazine base plate. This extension will not alter the capacity of the magazine. They will add approximately 5/8 inch additional gripping surface. Note: This extension will fit the XDM 45 and the Mod 2 45 models, however the checkering pattern across the front of the extension will not match the checkering pattern on these frames. This unit will NOT fit the Springfield XDS 45

Tweet

Magpul Industries, M-LOK Hand Stop Kit, Black

    Low-profile M-LOK slot index point for improved weapon control
    Aggressive TSP Texture
    Prevents the shooter's hand from reaching the muzzle

Product Description

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

Specifications
UPC    873750004693     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG608-BLK     
Model    M-LOK Hand Stop Kit
Type    Hand Stop     
Color    Black

Tweet

Magpul Industries, M-LOK Rail Covers, Black Finish, Type 2 Rail Cover, Includes 6 panels each covering one M-LOK slot, Fits M-LOK

    Two-piece covers that install directly onto most M-LOK aluminum hand guards
    TSP texture for additional grip
    Includes six panels

Product Description

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non polymer). These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function, feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look. Includes six panels, each covering one M-LOK slot. Made in U.S.A.

Specifications
UPC    873750005966     
Manufacturer    Magpul Industries
Manufacturer Part #    MAG603-BLK     
Model    M-LOK Rail Section
Type    Rail Panel     
Color    Black
Accessories    Type 2 Rail Cover     
Description    6 panels, each covering one M-LOK slot
Fit    M-LOK Hand Guard     
Subcategory    Handguard Accessories

Tweet

Shoot for longer without bruising or discomfort

Combining the advanced recoil control of the popular Decelerator internal design and material with Pachmayr's patented insert, this great looking slip-on recoil pad is unmatched by any other hunting pad. In addition, the material and design of the recoil pad make installation easier than ever. Best of all, all these features are offered at a price that is no more than other, less advanced pads. No other slip-on recoil pad can match all the features of Pachmayr's new Decelerator Slip-On at any price. Both black and brown models are available.

No other slip on has the patented, Pachmayr Speed-Mount insert. Experience the reduced felt recoil with the Decelerator Magnum Slip-On Recoil Pads. Order today!

    Practical - This Speed-Mount equipped slip-on is the ideal match for today's popular synthetic stocks, whether black or camo.
    Classic - Whether Vintage gun or the latest modern design, shooters can minimize recoil while retaining the gun's original specifications and value.
    Tactical - Tame the hardest hitting tactical load with this Decelerator Slip-On.

Small - 1-1/2" to 1-5/8" wide x 4-3/4" to 4-7/8" long

Medium - 1-1/2" to 1-3/4" wide x 5" to 5-3/16" long

Large - 1-3/4" to 1-7/8" wide x 5-3/16" to 5-7/16" long
Product numbers available: 04412, 04413, 04414, 04416, 04417, 04418

Tweet

BUTLER COMFORT STRETCH RIFLE SLING NEOPRENE RTX CAMO W/ SWIVELS

FEATURES:
-Soft, flexible closed cell neoprene w/ Comfort Stretch backing
-Dramatically reduces felt weight
-Non-slip Grippers™ keep it firmly in place
-Realtree Extra

Tweet

Ruger BX-25 10/22 22lr 25rd Magazine Value Pack - This two-pack of genuine Ruger® factory magazines with Ruger logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. BX-25® magazines will work with any factory original 10/22® Rifle, SR-22® Rifle, 22 Charger™ Pistol, .22 LR Ruger American Rimfire® Rifle and .22 LR Ruger 77/22® Rifle.

Tweet

Walther PK380 380acp 8rd Magazine - This is a factory replacement Walther magazine. It is manufactured to Walther's strict specifications and tolerances to ensure perfect fit and function. Insist on genuine factory magazines for your Walther pistol.

Features and Specifications:
Manufacturer Number: 505600
Walther Factory Magazine
Caliber: 380 ACP
Capacity: 8 rounds
Body Material: Stainless Steel
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Finish: Natural Stainless

Fits:
Walther PK380

Tweet

    MANUFACTURER: Taurus
    FAMILY: G3 Series
    MODEL: G3 Magazine
    TYPE: Accessory-Magazines
    CALIBER/GAUGE: 9mm
    CAPACITY: 15
    SHIPPING WEIGHT: 0.25 lbs.
    MFG MODEL NO: 358-0021-00
    UPC: 725327901495
    WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

Tweet