Pistol Accessories
Hope to see you soon,
Fred Emerson III
Owner
Fits: Ruger MKII MKIII
Tweet |
Fits Glock 19, 23, 32 with Glock 17, 22, 31 Mags
Tweet |
***Frame insert now available. Product PG-FIMPS
*** Will not work on S&W Shield 45 ACP.
Fits: Smith & Wesson M&P Shield 9 40
Tweet |
- Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP single and double-stack mags.
- Pocket-size. One size fits all. No inserts, spacers or adjustments at all !
- Easy loading; the rounds just drop in with no thumb pushing or pressing.
- No more pain ! Load hundreds of rounds painlessly.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading several mags with thumb.
- Fits in hand and pocket, weighs only 72 grams (2.55 Ounce).
- Highly durable.
Loads the following mags: Astra, Auto Ordnance, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Pheonix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther, and more.
Suggestion: Use our 1911AI™ Aligner Insert (Sold separably) with the UpLULA™ to assist loading single-stack mags of up to 14.5mm (0.57″) wide. The 1911AI™ narrows the width of the UpLULA™ inner cavity to allow less mag wiggling thus enabling better stabilization during loading of single-stack mags.
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
As If that wasn't good enough, we also offer you choices on how you carry it. It will work IWB (using the famous Sticky Holsters self-securing exterior), in the pocket, outside the belt (with built-in belt loop), or in our exclusive A-frame mode - which works with or without a belt.
But that's not all, it has a built in pocket to slide in your CCW permit, ID, credit or business cards.
Tweet |
Genuine Ruger® Factory Accessory
Tweet |
Fits Glock Models:
17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38 and 39
Note: Trijicon HD XR™ Night Sights are not compatible with the Glock® MOS pistol platform. Trijicon Bright & Tough™ Night Sights for Glock® Suppressor height sights should be used.
The HD™ Night Sights were specifically created to address the needs of tactical shooters.
The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting.
Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation.
The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting.
Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation.
Green tritium lamps are warranted for 12 years from date of manufacture.
Tweet |
C4® LED delivers 5300 candela peak beam intensity; 125 lumens
Runs 1.5 continuous hours to the 10% output level
Textured parabolic reflector produces a concentrated beam with optimum peripheral illumination; optimized electronics provide regulated intensity
Compact - Weighs 2.32 ounces (65.8 grams) with included battery; 2.71 in. (6.88 cm)
Key kit included for mounting to a variety of weapons (H&K USP models do not include key kit)
Rail clamp designed to rapidly attach/detach from side of weapon. One handed snap-on and tighten interface keeps hands away from muzzle when attaching/detaching
Ambidextrous momentary/steady On-Off switch
Uses one 3V CR2 lithium battery (included)
Impact-resistant Engineering polymer construction with durable anodized aluminum facecap
Borofloat high temperature glass lens
IPX7 waterproof to 1 meter for 30 minutes
Operating temperature: -40°F to +120°F.
Serialized for positive identification
Models also available for H&K USP Compact frame and H&K USP Full Size frame
Limited lifetime warranty
Assembled in USA
Tweet |
These grips are for the newer Ruger MKIII 22/45 RP (Removable Panels) only.
Tweet |
Fits Glock 26, 27 with Glock 19, 23 Mags
Tweet |
(It will not load .380 to .45 cal. mags. !)
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
***Will only work on .45ACP models
*** Will not work on S&W Shield 9mm or .40 cal.
Fits: Smith & Wesson Shield 45
Tweet |
Fits: Beretta Nano
Tweet |
- Loads .22LR, .25, .32 and .380ACP* cal. single-stack narrow-body pistol mags of all manufacturers, having:
- width of mag less than 1/2″ (including any side-button), and
- regular / moderate angle of lips (unlike Ruger’s MK series mags).
- Highly durable.
- No inserts, spacers, or adjustments at all ! (One SKU)
- Easy loading; the rounds just drop in with no fingers pushing or pressing them.
- No more pain ! Load hundreds of rounds, painlessly.
- Has a simple rounds’ unloader feature too.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading mags compared with thumb-loading.
- Fits in hand and pocket, weigh approx 42 grams (1.48 Ounce)
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
• Features a built-in tension spring to securely hold magazines of
various sizes
• Remove the belt clip and place two Single Mag Cases side-by-side
on Dual Rail Accessory Platform
• Fits 9mm/.40 cal
Tweet |
Fits: Taurus TCP
Tweet |
like:
- *Beretta M9-22
- **COLT 1911 .22
- Ruger SR22
- S&W M&P .22 compact
- *S&W M&P .22 10rd & 12rd
- Walther P22 / G22 / PPQ
- Walther PPK/S .22 (only the T12-LULA™)
* Need to file off a small nib/tab from the X12, a 5 minute work.
** Can also use the BabyUpLULA™
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
These units replace the magazine base plate. They do not alter the capacity of the magazine and provide better comfort by adding approximately 5/8 inch of gripping surface.
Key Benefits
- These units blend with the contours and texture of the handgun and have a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
Tweet |