View All Pistol Acc.
Hope to see you soon,
Fred Emerson III
Owner
Fits: Ruger MKII MKIII
Tweet |
These grips are for the newer Ruger MKIII 22/45 RP (Removable Panels) only.
Tweet |
- Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP single and double-stack mags.
- Pocket-size. One size fits all. No inserts, spacers or adjustments at all !
- Easy loading; the rounds just drop in with no thumb pushing or pressing.
- No more pain ! Load hundreds of rounds painlessly.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading several mags with thumb.
- Fits in hand and pocket, weighs only 72 grams (2.55 Ounce).
- Highly durable.
Loads the following mags: Astra, Auto Ordnance, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Pheonix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther, and more.
Suggestion: Use our 1911AI™ Aligner Insert (Sold separably) with the UpLULA™ to assist loading single-stack mags of up to 14.5mm (0.57″) wide. The 1911AI™ narrows the width of the UpLULA™ inner cavity to allow less mag wiggling thus enabling better stabilization during loading of single-stack mags.
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
(It will not load .380 to .45 cal. mags. !)
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
- Loads .22LR, .25, .32 and .380ACP* cal. single-stack narrow-body pistol mags of all manufacturers, having:
- width of mag less than 1/2″ (including any side-button), and
- regular / moderate angle of lips (unlike Ruger’s MK series mags).
- Highly durable.
- No inserts, spacers, or adjustments at all ! (One SKU)
- Easy loading; the rounds just drop in with no fingers pushing or pressing them.
- No more pain ! Load hundreds of rounds, painlessly.
- Has a simple rounds’ unloader feature too.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading mags compared with thumb-loading.
- Fits in hand and pocket, weigh approx 42 grams (1.48 Ounce)
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
like:
- *Beretta M9-22
- **COLT 1911 .22
- Ruger SR22
- S&W M&P .22 compact
- *S&W M&P .22 10rd & 12rd
- Walther P22 / G22 / PPQ
- Walther PPK/S .22 (only the T12-LULA™)
* Need to file off a small nib/tab from the X12, a 5 minute work.
** Can also use the BabyUpLULA™
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
like:
- Beretta U22 NEOS
- Browning BuckMark
- COLT Woodsman/Cadet
- High-Standard .22
- Ruger MK I, II, III, 22/45
- S&W 22A/22S (only X10-LULA™ will load well)
- S&W Victory
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
Fits Glock 19, 23, 32 with Glock 17, 22, 31 Mags
Tweet |
Fits Glock 26, 27 with Glock 19, 23 Mags
Tweet |
***Frame insert now available. Product PG-FIMPS
*** Will not work on S&W Shield 45 ACP.
Fits: Smith & Wesson M&P Shield 9 40
Tweet |
***Will only work on .45ACP models
*** Will not work on S&W Shield 9mm or .40 cal.
Fits: Smith & Wesson Shield 45
Tweet |
Fits: Beretta Nano
Tweet |
Fits: Taurus TCP
Tweet |
These units replace the magazine base plate. They do not alter the capacity of the magazine and provide better comfort by adding approximately 5/8 inch of gripping surface.
Key Benefits
- These units blend with the contours and texture of the handgun and have a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
Tweet |
Key Benefits
These units blend with the contours and texture of the handgun and have a factory appearance.
Tweet |
Key Benefits
- These units blend with the contours of the handgun and have a factory appearance.
- They are made from High Impact Polymer and withstand drop tests and temperatures from -20 F to 350 F.
- They provide control and comfort without sacrificing conceal ability.
Tweet |
Key Benefits
- These units blend with the contours and texture of the handgun and have a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They provide control and comfort without sacrificing conceal ability.
Tweet |
Pearce Grip Extension PG-19 Glock 17 19 22 23 34 - These Grip Extensions replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine providing better comfort and control by adding approximately 1/2 inch of gripping surface. An optional filler piece is provided for Glock models with a semi-circular cut-out in the lower front area of the grip body. This filler piece allows for installation of the PG-19 on all Mid and Full Size Glocks. Fits Models 17,18,19,22,23,24,25,31,32,34,35,37,38 - Full Metal Lined Magazines Only.
Key Benefits
- These units blend with the contours and texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They provide comfort by increasing the length of the grip 1/2 inch over stock dimensions.
- They provide an easier means of manually extracting the magazines.
Tweet |