AR Accessories & Parts

Limbsaver AR-15 M-16 Tactical Snap-On Recoil Pad Black - The LimbSaver AR-15/M4 Snap-On Recoil Pad securely snaps onto most six-position AR-15/M4 tactical stocks to reduce felt recoil by up to 50 percent while controlling muzzle jump. The recoil pad helps increase accuracy of follow-up shots and you’ll enjoy increased control for maximum stability. It’s made from LimbSaver’s proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. The no-slip surface stays in place, even in the rain. Quick and easy to install, the AR-15/M4 Snap-On Recoil Pad is durably built to be used outdoors in all harsh environments.

Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.

• Snaps onto most six-position AR-15/M4 tactical stocks
• Reduces muzzle jump allowing for faster target re-acquisition
• Helps keep rifle securely positioned against your shoulder
• Made from LimbSaver’s proprietary NAVCOM material to dampen vibration
• Built to be used outdoors in all harsh environments

Tweet

Maglula M-16 AR-15 Lula 5.56 .223 Loader - M-16 / AR-15 LULA™ loader and unloader for all such metal and plastic 5.56mm / .223 magazines, including PMAG’s and Lancer.

Loads 10, 20, 30, 40 & 100 round 5.56 / .223 magazines, like:

• M16 / AR15 / M4 USGI (NATO STANAG 4179)
• Magpul PMAG
• H&K metal 416 / SA80
• Beretta AR 70-90
• Thermold
• Orlite
• SIG Arms (black mags)

Benefits:

All-in-one magazine speed loader and unloader !

• Simple to use in either mode
• Eliminates thumb pain and injury
• Eliminates wear on feed lips
• Prolongs magazine life
• Lightweight and fits in pocket
• Reliable in all weather
• Durable reinforced polymer
• Tested and combat proven

6.8mm* – May load some of these magazines.

6.5 Grendel* – May load some of these magazines.

* Try before you buy.

See here for exact model fitment or go to www.maglula.com

Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.

Tweet

MI AR Long Picatinny Rail Forearm Mount -  Precision CNC manufactured from of 6061 aluminum and hardcoat anodized, these mount under your standard Carbine, M4, or Rifle length AR15 handguards. A very easy install; these do not require removal of your heat shields. These include rail, mounting hardware, 2 set of screws, and an allen wrench.
 

• Mounting hardware included
• Will fit AR series handguards with large or small holes
• Hard coat anodized 6061 aluminum construction
• In most circumstances you will be able to use standard heat shields after installation

Tweet

Hogue AR-15 M-16 Overmolded Rubber Grip With Finger Grooves Black - Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel, without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene, which results in a superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that outperform all other makes.

Tweet

Magpul AFG-2 Angled Fore Grip Black - The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.

By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Made in U.S.A.

Specs

Tweet

Ruger Rapid Deploy Front Sight 90414 - Our custom-designed Ruger® folding Front Sight seamlessly integrates on the Ruger® SR-22®, the Ruger® SR-556®, SR-762™, and any modern sporting rifle with a same-plane Picatinny rail mounting system. This lightweight, polymer sight is elevation-adjustable; folds flat to make room for optics and is spring-loaded to allow for rapid deployment with the push of a button. Also Available: Ruger® Rapid Deploy Rear Sight (Part Number 90415).
Genuine Ruger® Factory Accessory

Tweet

Magpul Mbus Front Back-Up Sight MAG247 Black - The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.

Made in U.S.A.

FEATURES

• Impact resistant polymer construction provides light weight and resists operational abuse
• Spring-loaded flip up sight easily activated from either side or by pressing the top
• Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
• Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
• Protective wings shield the spring-locking A2 front sight post
• Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

Specs

Due to MAP pricing please contact us for the BEST PRICE.

Tweet

Truglo 1/2" Picatinny Riser Scope / Red Dot - Great for any AR-15 Flattop

Mounts to existing Picatinny-style rail
 

• CNC-machined aluminum
• Easy to install without modification
• Ideal for mounting scopes, but can be used for Red•Dot sights as well
• Great for any AR-15 Flattop
• Raises mounting surface by 1/2"
• Length is approximately 4"

Tweet

Raptor Ambidextrous Charging Handle

The Raptor™ is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized.

Tweet

UTG 1" Medium Picatinny Weaver Scope Rings

• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installationand Secure Fit
• Fits All Picatinny/Weaver Rails

Tweet

UTG Ambidextrous 5-position Foldable Foregrip Black

• 5 Adjustable Foregrip Positions
• Ergonomic Finger Grooves for Most Comfortable Grip
• Clever End Cap Conceals Battery Storage and Controls Grip Mounting
• Practical Side Slides Allow for Ambi Use of Pressure Pad
• Simple Slide-on Mounting Deck for Most Solid Installation

Tweet

Magpul CTR AR Carbine Stock Mil-Spec - The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

FEATURES

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
• Sling Mounts
  • Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
  • Rear/Bottom - 1.25" sling loops
  • Toe - Lanyard hole for custom para-cord rigs

NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial Spec CTR
 

SPECIFICATIONS**

CTR Carbine Stock, Mil-Spec

• Weight: 8.8 oz.
• Weight, w/receiver extension: 12.8
• Length, max: 6.9 in.
• LOP Adjustment Range: 3.3 in.
• LOP, M4 Collapsed: ~10.5 in.
• LOP, M4 Extended: ~13.8 in.

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.

Tweet

CMMG AR-15 AR15 Lower Pin and Spring Kit

Parts Kit, AR15, Lower Pins and Springs

Tweet

RUGER ELITE 452 MSR TRIGGER 2 STAGE 90461 - The Ruger® Elite 452™ AR-Trigger is the perfect upgrade for any Modern Sporting Rifle*. including the Ruger® AR-556®, SR-556®, and SR-762™. This new two-stage trigger offers a smooth, crisp, 4.5 lb. trigger pull and a lightweight hammer that enables a 30% faster lock time over standard MSR triggers. The Ruger® Elite 452™ also features a full-strength hammer spring for consistent primer ignition and includes a safety selector and all necessary pins and springs for easy installation. Packaged with an ergonomic, optimized trigger-reach, polymer pistol grip, the Ruger® Elite 452™ is shipped fully assembled in a polymer fire control housing which allows the trigger to be dry-fired prior to installation, and the assembly can also serve as a trigger manipulation training tool. As an added benefit, the pistol grip and safety selector switch packaged with the trigger can be installed on any Mil-Spec AR rifle lower as replacement parts. * Fits any MSR receiver with .154" trigger/hammer pins.

Genuine Ruger® Factory Accessory

Tweet

Anderson Complete AR Lower Parts Kit Blk Trigger - The Lower Parts Kit for AM-15 includes the following: Bolt Catch, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch Spring, Buffer, Retainer, Buffer Retainer Spring, Disconnect, Disconnect Spring,  Traditional Hammer (Black in Color), Hammer Pin, Hammer Spring, Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Pistol Grip (A2 style), Pistol Grip Lock Washer, Pistol Grip Screw, Pivot Pin, Pivot Pin Detent, Pivot Pin Detent Spring, Selector, Selector Detent, Selector Detent Spring, Takedown Pin, Takedown Pin Detent, Takedown Pin, Detent Spring, Traditional Trigger (Black in Color), Trigger Guard, Trigger Guard Roll Pin, Trigger Pin, Trigger Spring.

Tweet

A high quality lower parts kit needed to assemble your AR-15 lower. Parts are made in USA! Assembly takes place right here at our new facility in Columbia, SC.

Features  black oxide coated hammer and trigger springs.

Includes:

Trigger
Bolt Catch
Trigger Spring
Disconnecter
Hammer
Disconnecter Spring
Hammer Spring
Magazine Catch Spring
A2 Grip
Bolt Catch Roll Pin
Buffer Retainer Pin
Magazine Release Button
Buffer Retainer Spring
Magazine Catch
Trigger Guard
Pivot Pin
Safety Selector
Selector Spring
Bolt Catch Spring
Safety Selector Detent
Detent Spring
Rear Take Down Pin
Bolt Catch Plunger
Takedown Pin Detent

Tweet

    MANUFACTURER: Leupold
    FAMILY: Mark AR Series
    MODEL: Mark AR Integral Mount
    TYPE: Accessory-Rings/Mounts/Bases
    FINISH: Matte Black
    SHIPPING WEIGHT: 0.55 lbs.
    ADDL INFO: Fits 1" Scope Tubes
    MFG MODEL NO: 177093
    UPC: 030317022105
    WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

Tweet

Product Details

The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction.

 

Features

    Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
    Impact resistant polymer construction provides light weight and resists operational abuse
    Wide-set, two-piece bolt-on design resists flexing
    Integral grooves interface with PMAG ribbing to eliminate slippage

 

Made in U.S.A.

 

E.A.R.

Export Administration Regulations Controlled Product
Specs

Specifications

    MagLink Magazine Coupler AR/M4
        Weight: 2.8 oz.

 

*NOTE: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 and 7.62x51 PMAGS or any metal magazine.

Tweet