AR Accessories & Parts
Hope to see you soon,
Fred Emerson III
Owner
FAMILY:Accessories
MODEL:M-223 Mount
TYPE:Accessory-Rings/Mounts/Bases
FINISH:Matte Black
ADDL INFO:Developed for M-223 Scopes
ADDL INFO:For Pic Rails/Weaver-Style Bse
ADDL INFO:Built-In 20 MOA Incline
Tweet |
Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Snaps onto most six-position AR-15/M4 tactical stocks
- Reduces muzzle jump allowing for faster target re-acquisition
- Helps keep rifle securely positioned against your shoulder
- Made from LimbSaver’s proprietary NAVCOM material to dampen vibration
- Built to be used outdoors in all harsh environments
Tweet |
Loads 10, 20, 30, 40 & 100 round 5.56 / .223 magazines, like:
- M16 / AR15 / M4 USGI (NATO STANAG 4179)
- Magpul PMAG
- H&K metal 416 / SA80
- Beretta AR 70-90
- Thermold
- Orlite
- SIG Arms (black mags)
Benefits:
All-in-one magazine speed loader and unloader !
- Simple to use in either mode
- Eliminates thumb pain and injury
- Eliminates wear on feed lips
- Prolongs magazine life
- Lightweight and fits in pocket
- Reliable in all weather
- Durable reinforced polymer
- Tested and combat proven
6.8mm* – May load some of these magazines.
6.5 Grendel* – May load some of these magazines.
* Try before you buy.
See here for exact model fitment or go to www.maglula.comLow quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
- Mounting hardware included
- Will fit AR series handguards with large or small holes
- Hard coat anodized 6061 aluminum construction
- In most circumstances you will be able to use standard heat shields after installation
Tweet |
Tweet |
By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
Made in U.S.A.
Specs
Tweet |
Genuine Ruger® Factory Accessory
Tweet |
Made in U.S.A.
FEATURES
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
- Protective wings shield the spring-locking A2 front sight post
- Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well
Specs
Due to MAP pricing please contact us for the BEST PRICE.
Tweet |
Mounts to existing Picatinny-style rail
- CNC-machined aluminum
- Easy to install without modification
- Ideal for mounting scopes, but can be used for Red•Dot sights as well
- Great for any AR-15 Flattop
- Raises mounting surface by 1/2"
- Length is approximately 4"
Tweet |
• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installationand Secure Fit
• Fits All Picatinny/Weaver Rails
Tweet |
• 5 Adjustable Foregrip Positions
• Ergonomic Finger Grooves for Most Comfortable Grip
• Clever End Cap Conceals Battery Storage and Controls Grip Mounting
• Practical Side Slides Allow for Ambi Use of Pressure Pad
• Simple Slide-on Mounting Deck for Most Solid Installation
Tweet |
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
FEATURES
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
- Supplemental friction lock minimizes accuracy robbing wobble*
- Sloping cheek weld combines a slim profile with user comfort
- Shielded release latch prevents snagging and accidental operation
- Premium chrome-silicon lock spring provides positive locking and long service life
- Side mounting slots accept optional cheek risers for NON AR15/M4 applications
- Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection
- Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments
- Sling Mounts
- Rear - Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
- Rear/Bottom - 1.25" sling loops
- Toe - Lanyard hole for custom para-cord rigs
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial Spec CTR
SPECIFICATIONS**
CTR Carbine Stock, Mil-Spec
- Weight: 8.8 oz.
- Weight, w/receiver extension: 12.8
- Length, max: 6.9 in.
- LOP Adjustment Range: 3.3 in.
- LOP, M4 Collapsed: ~10.5 in.
- LOP, M4 Extended: ~13.8 in.
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.
Tweet |
Genuine Ruger® Factory Accessory
Tweet |
Tweet |
Features black oxide coated hammer and trigger springs.
Includes:
Trigger
Bolt Catch
Trigger Spring
Disconnecter
Hammer
Disconnecter Spring
Hammer Spring
Magazine Catch Spring
A2 Grip
Bolt Catch Roll Pin
Buffer Retainer Pin
Magazine Release Button
Buffer Retainer Spring
Magazine Catch
Trigger Guard
Pivot Pin
Safety Selector
Selector Spring
Bolt Catch Spring
Safety Selector Detent
Detent Spring
Rear Take Down Pin
Bolt Catch Plunger
Takedown Pin Detent
Tweet |
The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction.
Features
Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
Impact resistant polymer construction provides light weight and resists operational abuse
Wide-set, two-piece bolt-on design resists flexing
Integral grooves interface with PMAG ribbing to eliminate slippage
Made in U.S.A.
E.A.R.
Export Administration Regulations Controlled Product
Specs
Specifications
MagLink Magazine Coupler AR/M4
Weight: 2.8 oz.
*NOTE: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 and 7.62x51 PMAGS or any metal magazine.
Tweet |
Tweet |