View All AR AK Parts Acc
Hope to see you soon,
Fred Emerson III
Owner
FAMILY: Mark AR Series
MODEL: Mark AR Integral Mount
TYPE: Accessory-Rings/Mounts/Bases
FINISH: Matte Black
SHIPPING WEIGHT: 0.55 lbs.
ADDL INFO: Fits 1" Scope Tubes
MFG MODEL NO: 177093
UPC: 030317022105
WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov
Tweet |
Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Snaps onto most six-position AR-15/M4 tactical stocks
- Reduces muzzle jump allowing for faster target re-acquisition
- Helps keep rifle securely positioned against your shoulder
- Made from LimbSaver’s proprietary NAVCOM material to dampen vibration
- Built to be used outdoors in all harsh environments
Tweet |
Fits AR-15
Carbine Length
Gas Tube
Product Description
LUTH-AR stainless steel carbine length gas tube.
Specifications
UPC 859819007669
Manufacturer Luth-AR
Manufacturer Part # BL-04A
Model AR15
Model Gas Tube
Type Gas Tube
Description Carbine Length Gas Tube
Subcategory Long Gun Parts
OAL 9 3/4"
Tweet |
Fits AR-15
Mid-Length
Gas Tube
Product Description
LUTH-AR stainless steel mid-length gas tube.
Specifications
UPC 859819007683
Manufacturer Luth-AR
Manufacturer Part # BL-04C
Model AR15
Model Gas Tube
Type Gas Tube
Description Mid Length Gas Tube
Subcategory Long Gun Parts
OAL 11 3/4″
Tweet |
Fits AR-15
Pistol Length
Gas Tube
Product Description
LUTH-AR stainless steel pistol length gas tube.
Specifications
UPC 859819007676
Manufacturer Luth-AR
Manufacturer Part # BL-04B
Model AR15
Model Gas Tube
Type Gas Tube
Description Pistol Length Gas Tube
Subcategory Long Gun Parts
OAL 6 11/16″
Tweet |
Specs:
Threaded Steel ring used to retain the carbine buffer tube to the lower receiver
Finish:
Maganese Phoshate
Tweet |
Loads 10, 20, 30, 40 & 100 round 5.56 / .223 magazines, like:
- M16 / AR15 / M4 USGI (NATO STANAG 4179)
- Magpul PMAG
- H&K metal 416 / SA80
- Beretta AR 70-90
- Thermold
- Orlite
- SIG Arms (black mags)
Benefits:
All-in-one magazine speed loader and unloader !
- Simple to use in either mode
- Eliminates thumb pain and injury
- Eliminates wear on feed lips
- Prolongs magazine life
- Lightweight and fits in pocket
- Reliable in all weather
- Durable reinforced polymer
- Tested and combat proven
6.8mm* – May load some of these magazines.
6.5 Grendel* – May load some of these magazines.
* Try before you buy.
See here for exact model fitment or go to www.maglula.comLow quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
Polymer three-piece design with interchangeable finger shelf
All mounting hardware included
Mounts to 1913 picatinny rail
Product Description
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
Specifications
UPC 873750003467
Manufacturer Magpul Industries
Manufacturer Part # MAG411-BLK
Model Angled Foregrip 1
Type Grip
Color Black
Fit Picatinny
Tweet |
High-strength grip weighing only 1.2 oz
The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction, we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.
Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2, while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors, it takes into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
Made in the USA.
Tweet |
By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
Made in U.S.A.
Specs
Tweet |
For the attachment of the Magpul AFG-2 to all M-LOK compatible hand guards and forends
Hardware included
3 Slots
Max overall length of 4.7"
Product Description
The Magpul AFG-2 M-LOK Adapter Rail is a polymer M-LOK accessory rail that is optimized for the attachment of the Magpul AFG-2 to all M-LOK compatible hand guards and forends. Molded of the same high quality material as other Magpul Polymer Rails, the AFG-2 M-LOK Adapter Rail has the same footprint as the AFG-2 and lower profile than a standard Picatinny rail to ensure a seamless transition between the different components. All hardware necessary for attachment directly to M-LOK slots on compatible aluminum or polymer hand guards and forends in included. 3 Slots, max overall length of 4.7". Made in U.S.A.
Specifications
UPC 873750002194
Manufacturer Magpul Industries
Manufacturer Part # MAG594-BLK
Model M-LOK Adaptor Rail
Type Rail Panel
Color Black
Fit M-LOK
Subcategory Handguard Accessories
Tweet |
Made from Mil-Spec anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms.
All mounting hardware included.
Made in the USA.
Tweet |
It is designed for enhanced shoulder purchase and offers improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE / CTR stocks, but may prohibit use of the fully collapsed position due to the extended, slanted back of most Commercial-Spec receiver extensions.
All mounting hardware included.
Made in the USA.
NOTE: Not compatible with MOE Fixed Carbine Stock.
Tweet |
Directly mounts to M-LOK compatible T-nuts
Recoil/Impact mitigation lugs
Milspec-anodized aluminum
Product Description
Designed for use with all M-LOK mounting surfaces, the M-LOK Aluminum Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile. Machined from milspec-anodized aluminum, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 MIL-STD-1913 Slots, max overall length of 3.15". Made in U.S.A.
Specifications
UPC 873750001791
Manufacturer Magpul Industries
Manufacturer Part # MAG588
Model Rail Light Mount
Color Black
Description Cantilever
Fit M-LOK Subcategory
Handguard Accessories
Tweet |
Its base is machined from Mil-Spec anodized aluminum and utilizes a coated steel loop, which accepts up to 1-1/4” webbing. With its compact and low profile design, it provides a minimal footprint, creating more hand guard real estate. Like any other Magpul M-LOK accessory, the M-LOK GI Sling Swivel features recoil / impact mitigation lugs and cammed T-Nuts for proper M-LOK engagement.
Made in the USA.
Tweet |
Directly mounts to M-LOK compatible T-nuts
Recoil/Impact mitigation lugs
Lightweight reinforced polymer
Product Description
Designed for use with all M-LOK mounting surfaces, the M-LOK Polymer Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile. Molded from heavy-duty reinforced polymer to save weight and expense, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 MIL-STD-1913 Slots, max overall length of 3.15". Made in U.S.A.
Specifications
UPC 873750001784
Manufacturer Magpul Industries
Manufacturer Part # MAG587
Model Polymer
Model Rail Light Mount
Type Mount
Color Black
Description Cantilever
Fit M-LOK
Subcategory Handguard Accessories
Tweet |
All steel construction
Extreme resistance to wear and corrosion
Mounts on any MIL-STD-1913 Picatinny rail
45 degree offset right-hand side
Product Description
Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Front Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less adjustment of the front post for easy zeroing, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. Made in U.S.A.
Specifications
UPC 873750000329
Manufacturer Magpul Industries
Manufacturer Part # MAG525
Model MBUS Pro Offset
Type Sight
Fit Picatinny
Color Black
Description Front
Subcategory Long Gun Sights
Tweet |
All steel construction
Extreme resistance to wear and corrosion
Mounts on any MIL-STD-1913 Picatinny rail
45 degree offset right-hand side
Product Description
Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Rear Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less windage adjustment for easy zeroing, dual rear apertures, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. Made in U.S.A.
Specifications
UPC 873750000336
Manufacturer Magpul Industries
Manufacturer Part # MAG526
Model MBUS Pro Offset
Type Sight
Fit Picatinny
Color Black
Description Rear
Subcategory Long Gun Sights
Tweet |