.jpg)
SHOP SERVICES AND FIREARMS SHIPPING MAINE GUN DEALER / ALLSPORT PERFORMANCE INC GUN SHOP HERMON, MAINE
SHOP SERVICES :
(During my busy season I may not be able to offer some services. (October - May) Firearms may have to be left here in order for work to be done.)
RIFLE BORESIGHTING :
We will bring into proper parallel alignment (the bore and scope of a gun) by sighting on a distant point through the bore and adjusting the scope on that same point.
MOUNT SCOPE PURCHASED FROM US AND BORE SIGHTING - Service not offered at this time
BORE SIGHTING ONLY - (Scope mounted and ready for bore sighting) - Service not offered at this time
CUSTOMER SUPPLIED SCOPE MOUNTING AND BORE SIGHTING (Factory drilled and tapped rifle only. Labor only. You will be charged for any hardware not supplied) - $25.00 (We have a limited amount of rails and scope rings in stock but we plan to increase stock on those items) - Service not offered at this time
​
​
​
​
​
​
​
​
GLOCK SIGHT INSTALLATION :
We will install standard sights and night sights on all Glock firearms $15.00 (If you buy a new Glock from us or the night sights from us installation is free)
​
​​
​
​
​
​
​
​
​
AR15 PARTS AND ACCESSORY INSTALLATION :
We install / replace butt stocks, buffer tubes, handguards, flash hiders, gas blocks, trigger guards, safety selectors, and more. We do not build or assemble AR rifles. We are not licensed to build firearms. Service not offered at this time
​
​
​
​
​
​
​
​
​
​
​
​
GUN CLEANING : Disassemble, clean, and inspect all internal and external parts. We will suggest any recommended repairs if needed. If the firearms is not working properly it may need to go to a gunsmith. (handguns and long guns only no muzzleloaders)
How it Works
Bring your gun(s) into our gun store any time you want them cleaned and we will clean them for you. Our goal will be to give the gun(s) an operational cleaning. So your gun(s) will be field stripped, cleaned thoroughly and lubricated. Be prepared to leave the gun(s) for a few days. We will contact you as soon as the job has been completed. Have an antique or vintage firearm that has rust on it? We can clean the firearm without effecting the value. Improper cleaning can ruin the value of any antique or vintage firearm. We may charge more for this service depending on how bad the firearm is.
Most handguns: ( Pistols - Revolvers ) - Coming Soon
Rifles: Coming Soon
Shotguns: Coming Soon
ATTN: Buy any NEW handgun from us and get 5 free cleanings
GUNSMITH SERVICES :
We are not a gunsmith so we do not repair guns. Of course I always recommend sending a firearm back to the manufacturer many have lifetime warranties but they do not specify it such as Ruger.
TROUBLE SHOOTING A SEMI AUTO HANDGUN:
Here are some quick things to check before sending your firearm back to the manufacturer or taking it to a gunsmith.
- Did you try different ammo? Not all ammo will function properly in semi auto handguns especially those that are in rimfire calibers. Try different grains and brands. If you are using steel cased or aluminum cased ammo try brass cased. If you are using reloads try factory ammo. Reloads can cause issues such as casings being stuck in the chamber and have a failure to extract.
- Did you try different magazines? Sometimes you will get a defective magazine.
- Have you cleaned and lightly lubed the firearm?
- Limp wristing is a common problem. Hold your arms out stiff with a firm grip on the firearm when firing. More the gun moves when firing the greater the chance of malfunction. You want the energy of firing to transfer into the action of the firearm not through your hands and arms. Don't hold a handgun loosely.
- Have you broken in the firearm? Shooting the firearm the recommended amount to break in the gun. Break in periods can be 200 rounds or more depending on the manufacturer. Some manufacturers will not look at the gun until the minimum amount of break in shots be fired through it.
TROUBLE SHOOTING A SEMI AUTO RIFLE:
Here are are some quick things to check before sending your firearm back to the manufacturer or taking it to a gunsmith.
- Did you try different ammo? Not all ammo will function properly in semi auto handguns especially those that are in rimfire calibers. Try different grains and brands. If you are using steel cased or aluminum cased ammo try brass cased. If you are using reloads try factory ammo. Reloads can cause issues such as casings being stuck in the chamber and have a failure to extract.
- Did you try different magazines? Sometimes you will get a defective magazine.
- Have you cleaned and lightly lubed the firearm?
- Have you broken in the firearm? Shooting the firearm the recommended amount to break in the gun. Break in periods can be 200 rounds or more depending on the manufacturer. Some manufacturers will not look at the gun until the minimum amount of break in shots be fired through it.
TROUBLE SHOOTING A BOLT ACTION RIFLE:
Here are some quick things to check before sending your firearm back to the manufacturer or taking it to a gunsmith.
- Did you try different ammo? Not all ammo will function properly in semi auto handguns especially those that are in rimfire calibers. Try different grains and brands. If you are using steel cased or aluminum cased ammo try brass cased. If you are using reloads try factory ammo. Reloads can cause issues such as casings being stuck in the chamber and have a failure to extract.
- Did you try different magazines? Sometimes you will get a defective magazine.
- Have you cleaned and lightly lubed the firearm?
​
​
FIREARMS STORAGE:
We do not offer this service to out of state residents. FYI If you drop any handgun off to a dealer in Maine you will not be able to get it back (if you are not a Maine resident) without sending it back to an FFL in your state. At that point a transfer would have to be performed. We can only sell or transfer handguns to state of Maine residents. In order to get your firearm back you would have to go through a background check. Background checks can only be legally done on handguns for Maine residents. Long guns are ok to perform storage and can be reclaimed only if the firearm is legal in your state of residence. We do not perform this service.
​
