Rifle - AR- AK Magazines
Hope to see you soon,
Fred Emerson III
Owner
WE SELL RIFLE MAGAZINES OVER 10RD CAPACITY TO MAINE RESIDENTS ONLY. NO OUT OF STATE SALES!
- WE DO NOT POST ALL OUR ACCESSORIES ON THIS WEBSITE.
Features and Specifications:
Manufacturer Number: 90010
Ruger Mini-14 .223 Rem. Magazine 20 Rounds Steel Blued Finish
Caliber: .223 Remington and 5.56 NATO
Capacity: 20 Round
Body Material: Steel
Spring Material: Heat Treated Spring Wire
Follower Material: Polymer
Follower Color: Black
Color: Blued Finish
Fits:
Ruger Mini-14 rifle
Note:
This magazine will hold the bolt open when the last round is fired.
Tweet |
Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining.
Made in U.S.A.
FEATURES
- Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
- Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
- Next-generation impact and crush resistant polymer construction
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- High-quality stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining from 1 to 25
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
- Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
To accommodate longer than SAAMI-spec match ammunition, this magazine may not drop free from all makes of lower receivers.
Tweet |
Tweet |
The PMAG® 30 AR 300 B GEN M3™ is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the nice features of 300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 Blackout magazine was a logical step for the PMAG line.
In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 Blackout rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 Blackout round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B brings along all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.
• The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG
• Dedicated, purpose-designed magazine for rifles chambered in 300 Blackout
• Optimized internal geometry accommodates the wide variety of bullet profiles used in 300 Blackout cartridges
• Carries forward the physical & performance features of the rest of the GEN M3 line
Blackout is a registered trademark of Advanced Armament Corp.
Tweet |
Steel Spring Wire
Polymer Body
Atchisson-type Conversion Systems
Product Description
CMMG's Magazine is a standard factory replacement magazine that is designed for use with the CMMG 22LR AR conversions. This magazine holds 10 rounds of .22 Long Rifle and is made of polymer.
Specifications
UPC 816422027590
Manufacturer CMMG
Manufacturer Part # 35AFCE1
Type Magazine
Model 350 Legend
Caliber 350 Legend
Capacity 5Rd
Color Black
Fit AR Rifles
Subcategory Rifle Magazines
Tweet |
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Similar to the MOE PMAG, the GEN M3 Window features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.
In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.
Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel™ system provides positive verification without affecting the durability or reliability of the magazine.
Made in U.S.A.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life USGI-spec stainless steel spring, black-oxide coated (MIL-DTL-13924D)
- Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for
easy determination of rounds remaining from 1 to 30 - Over-travel insertion stop on the spine
- Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
- Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Specifications and Features:
- Colt SP62103RP
- AR-15 Magazine
- .223 Remington/5.56 NATO
- 20 Rounds
- Aluminum
- Gray Finish
Tweet |
FEATURES
Next-generation impact and crush resistant polymer construction
Modified dimensions allow for wider compatibility with non Colt-spec platforms
Constant-curve internal geometry for smooth feeding
Anti-tilt, self-lubricating follower for increased reliability
Long life USGI-spec stainless steel spring
Over-travel insertion stop on the spine
Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
Tweet |
Everflex spring
Black anti-tilt AGF follower
Steel Construction
Product Description
Plastic works fine for toys and casual use, but has proven molecularly unstable in extreme environments, vulnerable to changes in humidity, and unable to retain shape during extended use. DURAMAG is the one magazine design that you can rely on during a sunny day at the range, frozen night on the tundra, in the sands of the desert, or pulling from long-term storage. Relentless reliability because a firearm is only as good as its magazine.
Specifications
UPC 766897410208
Manufacturer DURAMAG
Manufacturer Part # 3062041205CPD
Type Magazine
Caliber 7.62X39
Capacity 30Rd
Color Black
Fit AR
Tweet |
Notes:
Combine the Magpul PMAG AC magazine with the Magpul Hunter 700 Detachable Magazine Well (#428372) for the ultimate drop-in solution for your Remington 700. Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. Not compatible with Mossberg MVP.
Features
Revised edition with brown follower
Accepts a cartridge overall length of up to 2.86"
Next-generation impact and crush resistant polymer construction
Self-lubricating follower for increased reliability
Long life stainless steel spring
Paint pen dot matrix panels on the bottom of the body to allow for identification marking
Flared floorplate aids magazine handling and is easy to disassemble for maintenance
Tweet |
Features and Specifications:
Manufacturer Number: 90435
Ruger factory magazine
Caliber: .30-06 Springfield, .270 Winchester
Capacity: 4 Rounds
Body Material: Polymer
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Steel feed lips
Flush fit
Finish: Matte Black
Fits:
Ruger American Centerfire long action models
Tweet |
With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.
The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier storage. Features an easy-to-use loading lever, paint pen dot matrix for easy marking, and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR™ MK16/16S, HK®416, MR556, M27 IAR, IWI Tavor, and others.
FEATURES
- Next-generation impact and crush resistant polymer construction
- Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others
- Will seat fully loaded on a closed bolt
- Bolt hold open feature to lock the bolt back on the last round**
- Ratcheting Loading Lever to take tension off the spring for easy loading by hand
- Feed Tower compatible with most loading devices, including USGI stripper clips and guides, the StripLULA™, and others
- Designed to be left loaded for long term storage without any loss of function or degradation
- All components used are corrosion resistant
- Easy to disassemble for cleaning with only a flat-bladed screwdriver or similar
- Anti-glare translucent window on rear of drum allows for easy determination of rounds remaining
- Paint pen dot matrix panel on back of body to allow for identification marking
- Slip-on, semi-rigid Dust Cover prevents grit and debris intrusion during storage and transport
SPECIFICATIONS
- Weight, w/Dust Cover: 20.5 oz.
- Weight, loaded (M855 NATO): 46 oz.
- Length, max: 7.4 in.
- Width, max: 4.1 in.
*Optimized for use only with 5.56x45 NATO/.223 Remington cartridges. Use with other calibers such as .300 AAC Blackout is not recommended.
**The D-60 is designed to lock the bolt back after the last round for most AR15/M4/HK416 platforms. Inserting an empty magazine and manually cycling the charging handle will not activate the bolt hold open feature. In addition this feature may or may not work for weapons with bolt hold open levers that don't adhere to the Colt-spec.
Made in U.S.A.
Tweet |
MODEL:AI-Style Polymer Magazine
TYPE:Accessory-Magazines
CALIBER/GAUGE:308 Win
CAPACITY:5 rd.
ADDL INFO:AI-style Magazine
ADDL INFO:Also Fits 6.5 Creedmoor
ADDL INFO:Precision/Gunsite/American-AI
Tweet |
Everflex spring
Black Anti-tilt AGF follower
Steel Construction
Product Description
Plastic works fine for toys and casual use, but has proven molecularly unstable in extreme environments, vulnerable to changes in humidity, and unable to retain shape during extended use. DURAMAG is the one magazine design that you can rely on during a sunny day at the range, frozen night on the tundra, in the sands of the desert, or pulling from long-term storage. Relentless reliability because a firearm is only as good as its magazine.
Specifications
UPC 766897411311
Manufacturer DURAMAG
Manufacturer Part # 5X08041185CPD
Type Magazine
Caliber 308 Winchester
Caliber 762NATO
Capacity 5 Rounds
Color Black
Fit AR-10 Subcategory
Rifle Magazines
Tweet |
Steel Construction
Fits US Survival Rifle
8-Round Capacity
Product Description
This Henry Survival Rifle magazine features durable steel construction that will ensure a lifetime of flawless function and reliability.
Specifications
UPC 619835600424
Manufacturer Henry Repeating Arms
Manufacturer Part # HS-15-16-17-1PK
Type Magazine
Caliber 22 LR
Capacity 8 Rounds
Color Blue
Fit US Survival Rifle
Subcategory Rifle Magazines
Finish Blued
Tweet |
Tweet |
Tweet |
Tweet |