Glock Aftermarket Acc.
Tweet |
Tweet |
Features and Specifications:
Manufacturer Number: GL4
Lightweight 2oz. holster
Low profile design for concealability
Passive retention allowing rapid presentation
Rubberized paddle insert for extra stability
Reinforced rivet attachment
Right hand
Material: Polymer
Finish: Black
Fits:
Glock 21SF (rail only), 29, 30, 30SF, 39
Smith & Wesson Sigma V Series
Tweet |
GHO_STD - 3.5 COMPLETE TRIGGER KIT
We have combined our polished 3.5 LB. Drop-in Connector Trigger with five premium springs.
Fine tune your trigger pull, feel and weight all in one kit!
We combined all the parts necessary to give you best trigger pull possible. You save a few bucks and get everything in one shot! The Kit includes 5 parts:
Please Note that all trigger kits include the target setup and self-defense set up
1.) 1-3.5 LB. Drop-In
2.) 1- 6.0 lb Trigger Spring
3.) 1- 4.0 lb Firing Pin Spring (Target/Sport Configuration)
4.) 1- 6.0 lb Firing Pin Spring (Self-Defense Configuration)
5.) 1- Reduced power firing pin safety spring
Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols this is the Target/Sport configuration.
For Self Defense or in a 10mm/45 caliber Glock we recommend the 6.0 lb firing pin spring.
Tweet |
MODEL:G17 / G19 / G26 / G34 Magazine
TYPE:Accessory-Magazines
FINISH:Black
CALIBER/GAUGE:9mm
CAPACITY:24 rd.
ADDL INFO:24 rd. Magazine for Glock 9mm
ADDL INFO:Gen 5 Packaged Magazine
Tweet |
- Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP single and double-stack mags.
- Pocket-size. One size fits all. No inserts, spacers or adjustments at all !
- Easy loading; the rounds just drop in with no thumb pushing or pressing.
- No more pain ! Load hundreds of rounds painlessly.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading several mags with thumb.
- Fits in hand and pocket, weighs only 72 grams (2.55 Ounce).
- Highly durable.
Loads the following mags: Astra, Auto Ordnance, Barak, Beretta, Browning, Bul, Colt, CZ, EAA, FN, Glock, HK, Hi-Point, High Standard, Jericho, Kahr, Kel-Tec, Kimber, Les Baer, Llama, Luger, Magnum Research, Para Ordnance, Pheonix Arms, Ruger, Sigma, Sig/Sauer, S&W, Springfield Armory, Star, Steyr, Taurus, Vector, Walther, and more.
Suggestion: Use our 1911AI™ Aligner Insert (Sold separably) with the UpLULA™ to assist loading single-stack mags of up to 14.5mm (0.57″) wide. The 1911AI™ narrows the width of the UpLULA™ inner cavity to allow less mag wiggling thus enabling better stabilization during loading of single-stack mags.
See here for exact model fitment or go to www.maglula.com
Low quality Chinese counterfeit loaders cloning our patented UpLULA™ universal pistol magazine loaders are offered for sale on Amazon and eBay, and elsewhere. Please refrain from ordering loaders there. If you suspect receiving a counterfeit loader, please take few pictures of packaging and loader and send it to info@maglula.com. We’ll let you know counterfeit or genuine.
Tweet |
High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.
The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip.
Made in U.S.A.
FEATURES
- Compatible with all compact and sub-compact 9mm Glock handguns*
- Durable, lightweight, and extremely stiff polymer construction
- High visibility controlled-tilt follower
- Long life stainless steel spring for corrosion resistance
- Flared, easily removable floor plate
- Dot matrix panel for magazine marking and identification
- Full magazine indicator windows on both sides of body
- Drops free loaded or unloaded
*NOTE: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs and tolerances.
Tweet |
The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. Glock 17, 19, 26, 34
Made in U.S.A.
FEATURES
Compatible with all full-size, compact, and sub-compact 9mm Glock handguns*
Durable, lightweight, and extremely stiff polymer construction
High visibility controlled-tilt follower
Long life stainless steel spring for corrosion resistance
Flared, easily removable floor plate
Dot matrix panel for magazine marking and identification
Full magazine indicator windows on both sides of body
Drops free loaded or unloaded
*NOTE: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs and tolerances.
Tweet |
High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and capacity indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.
The PMAG 21 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip. Glock 17, 19, 26, 34
Made in U.S.A.
FEATURES
Compatible with all full-size, compact, and sub-compact 9mm double-stack Glock handguns
Durable, lightweight, and extremely stiff polymer construction
High visibility controlled-tilt follower
Long life stainless steel spring for corrosion resistance
Flared, easily removable floor plate
Dot matrix panel for magazine marking and identification
Magazine indicator windows on both sides of body at 10, 15, and 21 rounds remaining
Drops free loaded or unloaded
Tweet |
Fits Glock 19, 23, 32 with Glock 17, 22, 31 Mags
Tweet |
Fits Glock 26, 27 with Glock 19, 23 Mags
Tweet |
Fits Gen 5 models 17,19 and 34
Tweet |
Grip Enhancers replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine and provide better comfort by filling the semi-circular cut-out in the lower front area of the grip body. This component adds approximately 1/4 inch of gripping surface. This product will not fit a Non Full Metal Magazine
Key Benefits
- These units blend with the contours and texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They provide comfort without increasing the length of the grip over stock dimensions.
- They provide an easier means of manually extracting the magazines.
- Provides magazine identification via Mag-Track for those that rotate magazine usage.
Tweet |
Pearce Grip Extension PG-19 Glock 17 19 22 23 34 - These Grip Extensions replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine providing better comfort and control by adding approximately 1/2 inch of gripping surface. An optional filler piece is provided for Glock models with a semi-circular cut-out in the lower front area of the grip body. This filler piece allows for installation of the PG-19 on all Mid and Full Size Glocks. Fits Models 17,18,19,22,23,24,25,31,32,34,35,37,38 - Full Metal Lined Magazines Only.
Key Benefits
- These units blend with the contours and texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They provide comfort by increasing the length of the grip 1/2 inch over stock dimensions.
- They provide an easier means of manually extracting the magazines.
Tweet |
Key Benefits
- These units blend with the contours and texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
- Provides magazine identification via Mag-Track™ for those that rotate magazine usage.
Tweet |
Key Benefits
- These units increase the grip length of the Sub Compact Glock AutoPistols with out increasing their capacity.
- These units blend with the contours and fourth generation texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability
Tweet |
Fits: Glock G29
Tweet |
Key Benefits
- These units blend with the contours and texture of the handgun giving a factory appearance.
- They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
- They form the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.
Tweet |